U-Boot 2014.10-RK3288-02 (Nov 13 2015 - 10:22:31)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 300000000HZ
    ddr pll = 200000000HZ
    codec pll = 594000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
failed to prepare fdt from boot!
power key: bank-0 pin-5
can't find dts node for ricoh619
pmic:act8846
Can't find dts node for fuel guage cw201x
Enter power_led_init
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2015-11-13#2.17
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
Hit any key to stop autoboot:  0 
failed to load fdt from boot!
kernel   @ 0x02000000 (0x006cfab0)
ramdisk  @ 0x04bf0000 (0x00275f7a)
Secure Boot state: 0
bootrk: do_bootm_linux...
   Loading Device Tree to 0480b000, end 04826696 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (pc@pc) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #11 SMP PREEMPT Mon Jun 20 16:28:47 CST 2016
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] hdmi init vic is -1
[    0.000000] ion heap(drm): base(0) size(0) align(0)
[    0.000000] ion heap(cma): base(0) size(1000000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 16 MiB at 7f000000
[    0.000000] ion_reserve: cma reserved base 7f000000 size 16777216
[    0.000000] cma: CMA: reserved 16 MiB at 2e800000
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1f69000 s13376 r8192 d15296 u36864
[    0.000000] Kernel command line: console=tty0 console=ttyS2 earlyprintk root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init  mtdparts=rk29xxnand:0x00008000@0x00002000(resource),0x00008000@0x0000A000(boot),0x00002000@0x00012000(misc),0x0001a000@0x00014000(backup),-@0x0002e000(linuxroot) storagemedia=emmc loader.timestamp=2015-11-13_10:22:31 hdmi.vic=-1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 2024524k/2024524k available, 72628k reserved, 1302528K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0bf5ee0   (12216 kB)
[    0.000000]       .init : 0xc0bf6000 - 0xc0c50440   ( 362 kB)
[    0.000000]       .data : 0xc0c52000 - 0xc0de90e0   (1629 kB)
[    0.000000]        .bss : 0xc0de90e0 - 0xc0f0e6d4   (1174 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
[    0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 3
[    0.000000] channel:0, lkg:22
[    0.000000] target-temp:80
[    0.000000] channel:2, lkg:0
[    0.000000] channel:0, lkg:22
[    0.000000] channel:1, lkg:20
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.447969] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.447999] pid_max: default: 32768 minimum: 301
[    0.448118] Security Framework initialized
[    0.448144] SELinux:  Initializing.
[    0.448224] Mount-cache hash table entries: 512
[    0.448874] Initializing cgroup subsys debug
[    0.448898] Initializing cgroup subsys memory
[    0.448932] Initializing cgroup subsys freezer
[    0.448969] CPU: Testing write buffer coherency: ok
[    0.449291] /cpus/cpu@0 missing clock-frequency property
[    0.449315] /cpus/cpu@1 missing clock-frequency property
[    0.449333] /cpus/cpu@2 missing clock-frequency property
[    0.449351] /cpus/cpu@3 missing clock-frequency property
[    0.449409] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.449471] Setting up static identity map for 0xc089d898 - 0xc089d8f0
[    0.452592] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x164c (version 3.1)
[    0.525542] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.545213] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.564921] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.565022] Brought up 4 CPUs
[    0.565087] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.565105] CPU: All CPU(s) started in SVC mode.
[    0.565849] devtmpfs: initialized
[    0.570060] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.571167] pinctrl core: initialized pinctrl subsystem
[    0.571424] regulator-dummy: no parameters
[    0.584838] NET: Registered protocol family 16
[    0.586573] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.586972] ion_snapshot: 0x2e1b8000 map to 0xf0107000 and copy to 0xc0ee6f8c (version 0.1)
[    0.587209] Registered FIQ tty driver
[    0.587594] fiq-debugger is disabled in device tree
[    0.597891] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.597993] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.598021] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.598200] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.598287] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.598314] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.598494] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.598577] rk_iommu ff930300.vopb_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.598605] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.598793] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[    0.598876] rk_iommu ff940300.vopl_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.598903] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.599088] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.599172] rk_iommu ff9c0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.599199] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.599369] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.599449] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.599476] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.599662] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.599745] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.599772] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[    0.601449] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.601476] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.602053] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
[    0.627366] bio: create slab <bio-0> at 0
[    0.627869] Rockchip hdmi driver version 2.0
[    0.627869] .
[    0.628998] SCSI subsystem initialized
[    0.629166] usbcore: registered new interface driver usbfs
[    0.629224] usbcore: registered new interface driver hub
[    0.629320] usbcore: registered new device driver usb
[    0.631910] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.632569] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.633031] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.633291] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[    0.633781] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.633923] media: Linux media interface: v0.10
[    0.633971] Linux video capture interface: v2.00
[    0.634034] pps_core: LinuxPPS API ver. 1 registered
[    0.634053] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.634087] PTP clock support registered
[    0.634154] i2c-core: driver [bq24296] using legacy suspend method
[    0.634173] i2c-core: driver [bq24296] using legacy resume method
[    0.634989] Rockchip ion module is successfully loaded (v1.1)
[    0.635160] Advanced Linux Sound Architecture Driver Initialized.
[    0.635569] Bluetooth: Core ver 2.16
[    0.635633] NET: Registered protocol family 31
[    0.635651] Bluetooth: HCI device and connection manager initialized
[    0.635676] Bluetooth: HCI socket layer initialized
[    0.635697] Bluetooth: L2CAP socket layer initialized
[    0.635731] Bluetooth: SCO socket layer initialized
[    0.635969] cfg80211: Calling CRDA to update world regulatory domain
[    0.640222] act_dcdc1: 1200 mV 
[    0.643190] vccio: 3300 mV 
[    0.645055] vdd_logic: 700 <--> 1500 mV at 1150 mV 
[    0.648031] act_dcdc4: 2000 mV 
[    0.649264] vccio_sd: 1800 <--> 3300 mV at 3300 mV 
[    0.651583] act_ldo2: 1050 mV 
[    0.653899] act_ldo3: 2800 mV 
[    0.656239] act_ldo4: 3300 mV 
[    0.658541] act_ldo5: 3300 mV 
[    0.660857] act_ldo6: 1100 mV 
[    0.663164] vcc_18: 1800 mV 
[    0.665468] act_ldo8: 1850 mV 
[    0.670212] vdd_arm: 712 <--> 1500 mV at 1350 mV 
[    0.674917] vdd_gpu: 712 <--> 1500 mV at 900 mV 
[    0.677091] rk808: probe of 0-001b failed with error -11
[    0.677173] i2c-core: driver [rk818] using legacy suspend method
[    0.677192] i2c-core: driver [rk818] using legacy resume method
[    0.678819] Switching to clocksource arch_sys_counter
[    0.703302] rga: Module initialized.
[    0.704009] rga2 ff920000.rga: rga ion client create success!
[    0.704194] rga: Driver loaded succesfully
[    0.704401] fb disp policy is box
[    0.704451] rk-fb rockchip-fb: rk fb ion client create success!
[    0.704472] rk-fb rockchip-fb: rockchip framebuffer driver probe
[    0.704810] rk-screen rk_screen.8: rockchip screen probe success
[    0.705040] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[    0.705404] rk32-edp ff970000.edp: screen is not edp!
[    0.705434] rk32-edp: probe of ff970000.edp failed with error -22
[    0.705905] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
[    0.706136] graphics fb0: rockchip framebuffer registerd:fb0
[    0.706439] graphics fb1: rockchip framebuffer registerd:fb1
[    0.706617] graphics fb2: rockchip framebuffer registerd:fb2
[    0.706795] graphics fb3: rockchip framebuffer registerd:fb3
[    0.707200] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60 
[    0.707236] rk3288-lcdc lcdc0: wakeup from standby!
[    0.724163] alloc_buffer:ion_phy_addr=0x7f000000
[    0.734989] fb0:phy:7f000000>>vir:f0191000>>len:0x1000000
[    0.735015] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
[    0.735214] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[    0.735238] rk_fb_trsm_ops_get:un supported transmitter:0!
[    0.735484] graphics fb4: rockchip framebuffer registerd:fb4
[    0.735815] graphics fb5: rockchip framebuffer registerd:fb5
[    0.735991] graphics fb6: rockchip framebuffer registerd:fb6
[    0.736168] graphics fb7: rockchip framebuffer registerd:fb7
[    0.736431] rk3288-lcdc lcdc1: lcdc1: dclk:148500000>>fps:60 
[    0.736454] rk3288-lcdc lcdc1: wakeup from standby!
[    0.736474] fb4:phy:7f000000>>vir:f0191000>>len:0x1000000
[    0.736494] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
[    0.747269] tc358749_hdmiin_probe!
[    0.747485] tc358749_hdmiin_probe OK!
[    0.748019] NET: Registered protocol family 2
[    0.748686] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.748832] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.748975] TCP: Hash tables configured (established 8192 bind 8192)
[    0.749044] TCP: reno registered
[    0.749065] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.749109] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.749321] NET: Registered protocol family 1
[    0.749606] RPC: Registered named UNIX socket transport module.
[    0.749628] RPC: Registered udp transport module.
[    0.749645] RPC: Registered tcp transport module.
[    0.749660] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.750300] Unpacking initramfs...
[    0.892960] Freeing initrd memory: 2516K (c4bf0000 - c4e65000)
[    0.893683] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    0.894251] vcodec_service: probe device ff9a0000.vpu_service
[    0.894466] vcodec_service: No reset resource define
[    0.894648] vcodec_service: ff9a0000.vpu_service: power on
[    0.894744] vcodec_service: probe device ff9a0000.vpu_service
[    0.894769] vcodec_service: checking hw id 4831
[    0.895796] vcodec_service: ff9a0000.vpu_service: power off...
[    0.895849] vcodec_service: done
[    0.895870] vcodec_service: init success
[    0.895944] vcodec_service: probe device ff9c0000.hevc_service
[    0.896279] vcodec_service: ff9c0000.hevc_service: power on
[    0.896349] vcodec_service: probe device ff9c0000.hevc_service
[    0.896372] vcodec_service: checking hw id 6867
[    0.896934] vcodec_service: ff9c0000.hevc_service: power off...
[    0.896982] vcodec_service: done
[    0.897000] vcodec_service: init success
[    0.897263] rknand: probe of ff400000.nandc failed with error -1
[    0.899191] audit: initializing netlink socket (disabled)
[    0.899247] type=2000 audit(0.450:1): initialized
[    0.904700] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.905122] fuse init (API version 7.22)
[    0.905565] msgmni has been set to 1447
[    0.907430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.907462] io scheduler noop registered
[    0.907479] io scheduler deadline registered
[    0.907573] io scheduler cfq registered (default)
[    0.908798] rockchip-hdmiv2 ff980000.hdmi: rockchip hdmiv2 probe sucess.
[    0.909974] rk_iommu ff900800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x2e29c000
[    0.910938] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    0.910967] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    0.912324] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    0.912352] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.912633] pwm-voltage-regulator pwm_regulator.22: unable to request PWM, trying legacy API
[    0.912662] pwm-voltage-regulator pwm_regulator.22: unable to request legacy PWM
[    0.912705] platform pwm_regulator.22: Driver pwm-voltage-regulator requests probe deferral
[    0.913147] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    0.913361] serial ff180000.serial: membase f0172000
[    0.913525] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2
[    0.915066] console [ttyS2] enabled
[    0.915267] serial ff690000.serial: membase fed60000
[    0.917998] loop: module loaded
[    0.918365] zram: Created 1 device(s) ...
[    0.918453] i2c-core: driver [mpu6050B1] using legacy suspend method
[    0.918476] i2c-core: driver [mpu6050B1] using legacy resume method
[    0.918503] mpu_init: Probe name mpu6050B1
[    0.918653] ak8963_mod_init: Probe name ak8963_mod
[    0.919351] SCSI Media Changer driver v0.25 
[    0.919675] tun: Universal TUN/TAP device driver, 1.6
[    0.919697] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.920408] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    0.920437] stmmac_probe_config_dt: clock input/output? (input).
[    0.920460] stmmac_probe_config_dt: TX delay(0x30).
[    0.920480] stmmac_probe_config_dt: RX delay(0x20).
[    0.920538] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    0.920559] stmmc_pltfr_init:
[    0.920573] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[    0.920605] gmac_phy_reset: ERROR: Request pin stmmc_pltfr_init failed.
[    0.920626] stmmc_pltfr_init: init for RGMII
[    0.920644] tx delay=0x30
[    0.920644] rx delay=0x20
[    0.920670] tx delay=0x30
[    0.920670] rx delay=0x20
[    0.921143] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    0.921164]  Normal descriptors
[    0.921180]  Ring mode enabled
[    0.921196]  DMA HW capability register supported
[    0.921213]  RX Checksum Offload Engiported
[    0.921251]  Wake-Up On Lan supported
[    0.921296]  Enable RX Mitigation via HW Watchdog Timer
[    0.921770] PPP generic driver version 2.4.2
[    0.921923] PPP BSD Compression module registered
[    0.921946] PPP Deflate Compression module registered
[    0.921978] PPP MPPE Compression module registered
[    0.921999] NET: Registered protocol family 24
[    0.922046] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    0.922074] CSLIP: code copyright 1989 Regents of the University of California.
[    0.922275] usbcore: registered new interface driver catc
[    0.922335] usbcore: rLoading, please wait...
Begin: Loading essential drivers ... FATAL: Could not load /lib/modules/3.10.0/modules.dep: No such filegistered new interface driver kaweth
[    0.922358] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    0.922412] usbcore: registered new interface driver pegasus
[    0.922463] usbcore: registered new interface driver rtl8150
[    0.922513] usbcore: registered new interface driver r8152
[    0.922533] hso: drivers/net/usb/hso.c: Option Wireless
[    0.922612] usbcore: registered new interface driver hso
[    0.922668] usbcore: registered new interface driver asix
[    0.922722] usbcore: registered new interface driver ax88179_178a
[    0.922779] usbcore: registered new interface driver cdc_ether
[    0.922829] usbcore: registered new interface driver cdc_eem
[    0.922879] usbcore: registered new interface driver dm9601
[    0.922927] usbcore: registered new interface driver dm9620
[    0.922986] usbcore: registered new interface driver smsc75xx
[    0.923049] usbcore: registered new interface driver smsc95xx
[    0.923101] usbcore: registered new interface driver gl620a
[    0.923151] usbcore: registered new interface driver net1080
[    0.923202] usbcore: registered new interface driver plusb
[    0.923253] usbcore: registered new interface driver rndis_host
[    0.923302] usbcore: registered new interface driver cdc_subset
[    0.923351] usbcore: registered new interface driver zaurus
[    0.923402] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    0.923487] usbcore: registered new interface driver int51x1
[    0.923540] usbcore: registered new interface driver kalmia
[    0.923591] usbcore: registered new interface driver ipheth
[    0.923644] usbcore: registered new interface driver sierra_net
[    0.923694] usbcore: registered new interface driver cx82310_eth
[    0.923762] usbcore: registered new interface driver cdc_ncm
[    0.923816] usbcore: registered new interface driver qmi_wwan
[    0.923867] usbcore: registered new interface driver cdc_mbim
[    0.923888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.926344] EHCI: ehci_rk_probe f1240000 f1240010
[    0.926372] rockchip_ehci_host ff500000.usb: EHCI Host Controller
[    0.926414] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    0.926748] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    0.944587] rockchip_ehci_host ff500000.usb: USB 2.0 started, EHCI 1.00
[    0.944697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.944725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.944753] usb usb1: Product: EHCI Host Controller
[    0.944774] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    0.944796] usb usb1: SerialNumber: ff500000.usb
[    0.945284] hub 1-0:1.0: USB hub found
[    0.945319] hub 1-0:1.0: 1 port detected
[    0.945492] EHCI: ehci_rk_probe ok
[    0.945611] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.945834] usbcore: registered new interface driver cdc_acm
[    0.945857] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.945929] usbcore: registered new interface driver usblp
[    0.945983] usbcore: registered new interface driver cdc_wdm
[    0.946056] usbcore: registered new interface driver usb-storage
[    0.946107] usbcore: registered new interface driver ums-alauda
[    0.946156] usbcore: registered new interface driver ums-cypress
[    0.946205] usbcore: registered new interface driver ums-datafab
[    0.946256] usbcore: registered new interface driver ums_eneub6250
[    0.946304] usbcore: registered new interface driver ums-freecom
[    0.946358] usbcore: registered new interface driver ums-isd200
[    0.946408] usbcore: registered new interface driver ums-jumpshot
[    0.946456] usbcore: registered new interface driver ums-karma
[    0.946504] usbcore: registered new interface driver ums-onetouch
[    0.946553] usbcore: registered new interface driver ums-sddr09
[    0.946602] usbcore: registered new interface driver ums-sddr55
[    0.946650] usbcore: registered new interface driver ums-usbat
[    0.946751] usbcore: registered new interface driver usbserial
[    0.946807] usbcore: registered new interface driver usbserial_generic
[    0.946850] usbserial: USB Serial support registered for generic
[    0.946900] usbcore: registered new interface driver option
[    0.946938] usbserial: USB Serial support registered for GSM modem (1-port)
[    0.947040] usbcore: registered new interface driver trancevibrator
[    0.947063] usb20_otg: version 3.10a 21-DEC-2012
[    0.947882] usb20_otg ff580000.usb: DWC OTG Controller
[    0.947924] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    0.947969] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    0.948037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.948065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.948092] usb usb2: Product: DWC OTG Controller
[    0.948112] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    0.948133] usb usb2: SerialNumber: ff580000.usb
[    0.948549] hub 2-0:1.0: USB hub found
[    0.948581] hub 2-0:1.0: 1 port detected
[    0.948888] usb20_host: version 3.10a 21-DEC-2012
[    0.951581] usb20_host ff540000.usb: DWC OTG Controller
[    0.951621] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    0.951664] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    0.951822] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.951849] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.951876] usb usb3: Product: DWC OTG Controller
[    0.951896] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    0.951917] usb usb3: SerialNumber: ff540000.usb
[    0.952360] hub 3-0:1.0: USB hub found
[    0.952392] hub 3-0:1.0: 1 port detected
[    0.953115] usbcore: registered new interface driver xpad
[    0.953187] usbcore: registered new interface driver usb_acecad
[    0.953265] usbcore: registered new interface driver aiptek
[    0.953322] usbcore: registered new interface driver gtco
[    0.953379] usbcore: registered new interface driver hanwang
[    0.953434] usbcore: registered new interface driver kbtab
[    0.953496] usbcore: registe or directory
FATAL: Could not load /lib/modules/3.10.0/moduleered new interface driver wacom
[    0.954041] .. rk pwm remotectl v1.1 init
[    0.954296] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[    0.959343] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    0.959408] i2c /dev entries driver
[    0.960115] IR NEC protocol handler initialized
[    0.960138] IR RC5(x) protocol handler initialized
[    0.960157] IR RC6 protocol handler initialized
[    0.960174] IR JVC protocol handler initialized
[    0.960191] IR Sony protocol handler initialized
[    0.960208] IR RC5 (streamzap) protocol handler initialized
[    0.960227] IR SANYO protocol handler initialized
[    0.960244] IR MCE Keyboard/mouse protocol handler initialized
[    0.960433] usbcore: registered new interface driver uvcvideo
[    0.960454] USB Video Class driver (1.1.1)
[    0.964029] i2c-core: driver [bq27320] using legacy suspend method
[    0.964058] i2c-core: driver [bq27320] using legacy resume method
[    1.023296] tsadc ff280000.tsadc: initialized
[    1.023679] device-mapper: uevent: version 1.0.3
[    1.023957] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.024257] Bluetooth: HCI UART driver ver 2.2
[    1.024282] Bluetooth: HCI H4 protocol initialized
[    1.024302] Bluetooth: HCILL protocol initialized
[    1.024321] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.21
[    1.024342] rtk_btusb: Register usb char device interface for BT driver
[    1.024525] usbcore: registered new interface driver rtk_btusb
[    1.025167] DVFS WARNING:    clk_enable_dvfs: clk(aclk_vio1) freq table all value are smaller than default(594000), use default, just enable dvfs
[    1.028097] cpuidle: using governor ladder
[    1.028121] cpuidle: using governor menu
[    1.028162] Synopsys Designware Multimedia Card Interface Driver
[    1.028182] MHSC version = Ver 2.00 2015-06-10
[    1.028517] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    1.028573] dwmmc_rockchip ff0f0000.rksdmmc: failed to get hpclk_mmc
[    1.028914] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[    1.059459] hdmi output corlor mode is 3
[    1.059497] switch:en=1,lcdc_id=1,screen type=6,cur type=1
[    1.062717] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    1.062754] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    1.063104] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    1.063154] dwmmc_rockchip ff0c0000.rksdmmc: failed to get hpclk_mmc
[    1.063926] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    1.064548] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[    1.094814] mmc0: BKOPS_EN bit is not set
[    1.098978] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[    1.099029] [mmc0] tuning regsbase addr 0x218.
[    1.099624] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000088]
[    1.099642] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
[    1.099683] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:0, data.error:-84
[    1.099965] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-180 (17 len)
[    1.099984] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 203-282 (8 len)
[    1.100002] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-180 (17 len)
[    1.100018] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 90
[    1.100068] mmc0: new HS200 MMC card at address 0001
[    1.100336] mmcblk0: mmc0:0001 AGND3R 14.5 GiB 
[    1.100651]   resource: 0x000400000 -- 0x001400000 (16 MB)
[    1.100671]       boot: 0x001400000 -- 0x002400000 (16 MB)
[    1.100685]       misc: 0x002400000 -- 0x002800000 (4 MB)
[    1.100700]     backup: 0x002800000 -- 0x005c00000 (52 MB)
[    1.100714]  linuxroot: 0x005c00000 -- 0x3a3a00000 (14814 MB)
[    1.100736]  mmcblk0: p1 p2 p3 p4 p51358..dw_mci_set_ios:  no card. [mmc1]
[    1.102065] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    1.102072] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[    1.102388] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    1.102433] dwmmc_rockchip ff0d0000.rksdmmc: failed to get hpclk_mmc
[    1.102656] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    1.141412] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    1.141436] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    1.141712] leds-gpio leds.27: pins are not configured from the driver
[    1.141999] hidraw: raw HID events driver (C) Jiri Kosina
[    1.143480] usbcore: registered new interface driver usbhid
[    1.143498] usbhid: USB HID core driver
[    1.143641] ashmem: initialized
[    1.143764] logger: created 256K log 'log_main'
[    1.143874] logger: created 256K log 'log_events'
[    1.143977] logger: created 256K log 'log_radio'
[    1.144073] logger: created 256K log 'log_system'
[    1.145145] input: rk29-keypad as /devices/ff100000.adc/key.31/input/input1
[    1.145976] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ff890000.rockchip-i2s; cannot claim for 2-0010
[    1.146009] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
[    1.146027] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
[    1.146048] ES8323 2-0010: Error applying setting, reverse things back
[    1.147233] rockchip-spdif ff880000.rockchip-spdif: spdif ready.
[    1.308648] rk_fb_switch_screen: wait update_regs_wait timeout
[    1.308708] rk3288-lcdc lcdc1: lcdc1: dclk:74250000>>fps:60 
[    1.308743] pixel clk is 74250000 tmds clk is 74250000
[    1.308794] rockchip-hdmiv2 ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
[    1.416896] switch:en=0,lcdc_id=1,screen type=6,cur type=6
[    1.672728] rk_fb_switch_screen: wait update_regs_wait timeout
[    1.672759] rk3288-lcdc lcdc1: no layer is used,go to standby!
[    1.781332] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
[    1.781351] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
[    1.781366] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
[    1.781380] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
[    1.781394] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
[    1.781407] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
[    1.781421] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
[    1.781435] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
[    1.781449] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
[    1.781462] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
[    1.781476] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
[    1.781489] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
[    1.781504] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
[    1.781516] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
[    1.781530] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
[    1.781543] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
[    1.781557] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
[    1.781570] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
[    1.781585] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
[    1.781598] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
[    1.781611] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
[    1.781625] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
[    1.781639] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
[    1.781651] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
[    1.781666] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
[    1.781679] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
[    1.781693] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
[    1.781706] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
[    1.781719] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
[    1.781732] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
[    1.781747] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
[    1.781760] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
[    1.781785] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
[    1.781798] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
[    1.781812] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
[    1.781825] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
[    1.781839] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
[    1.781852] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
[    1.781867] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
[    1.781879] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
[    1.781892] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
[    1.781904] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
[    1.781918] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
[    1.781931] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
[    1.782070] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
[    1.782088] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
[    1.782101] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
[    1.782114] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
[    1.782148] ES8323 2-0010: ASoC: mux Differential Mux has no paths
[    1.788238] rockchip-es8323 rockchip-es8323.26:  ES8323 HiFi <-> ff890000.rockchip-i2s mapping ok
[    1.788874] u32 classifier
[    1.788887]     Actions configured
[    1.788900] Netfilter messages via NETLINK v0.30.
[    1.788951] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.789206] ctnetlink v0.93: registering with nfnetlink.
[    1.789269] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    1.789281] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    1.789492] xt_time: kernel timezone is -0000
[    1.789658] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.789762] arp_tables: (C) 2002 David S. Miller
[    1.789800] TCP: cubic registered
[    1.789809] Initializing XFRM netlink socket
[    1.789972] NET: Registered protocol family 10
[    1.790390] mip6: Mobile IPv6
[    1.790418] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.790519] sit: IPv6 over IPv4 tunneling driver
[    1.790785] NET: Registered protocol family 17
[    1.790869] NET: Registered protocol family 15
[    1.790920] Bridge firewalling registered
[    1.790933] Ebtables v2.0 registered
[    1.791107] Bluetooth: RFCOMM TTY layer initialized
[    1.791137] Bluetooth: RFCOMM socket layer initialized
[    1.791146] Bluetooth: RFCOMM ver 1.11
[    1.791156] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.791164] Bluetooth: BNEP filters: protocol multicast
[    1.791176] Bluetooth: BNEP socket layer initialized
[    1.791185] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.791198] Bluetooth: HIDP socket layer initialized
[    1.791228] l2tp_core: L2TP core driver, V2.0
[    1.791243] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.791251] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.791462] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.791474] [WLAN_RFKILL]: can't find rockchip,grf property
[    1.791485] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[    1.791497] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.791508] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    1.791520] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.791545] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[    1.791567] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    1.791579] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.791609] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[    1.791621] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    1.791660] [BT_RFKILL]: Enter rfkill_rk_init
[    1.791775] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[    1.791798] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 270.
[    1.791815] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[    1.791832] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[    1.791849] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[    1.791894] [BT_RFKILL]: Request irq for bt wakeup host
[    1.791982] [BT_RFKILL]: ** disable irq
[    1.792057] [BT_RFKILL]: ap6335 device registered.
[    1.792110] Key type dns_resolver registered
[    1.793120] Registering SWP/SWPB emulation handler
[    1.793419] ddrfreq: verion 1.2 20140526
[    1.793435] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 492MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
[    1.793449] ddrfreq: auto-freq=0
[    1.793456] ddrfreq: auto-freq-table[0] 240MHz
[    1.793465] ddrfreq: auto-freq-table[1] 324MHz
[    1.793472] ddrfreq: auto-freq-table[2] 456MHz
[    1.793480] ddrfreq: auto-freq-table[3] 528MHz
[    1.805317] act_ldo3: operation not allowed
[    1.805329] rgb2hdmi_probe: turn on ldo3 done.
[    1.805574] act_ldo4: operation not allowed
[    1.805583] rgb2hdmi_probe: turn on ldo done.
[    1.805835] act_ldo2: operation not allowed
[    1.805844] rgb2hdmi_probe: turn on ldo2 done.
[    1.806085] act_ldo8: operation not allowed
[    1.806094] rgb2hdmi_probe: turn on ldo done.
[    1.806212] switch:en=1,lcdc_id=0,screen type=1,cur type=1
[    2.056491] rk_fb_switch_screen: wait update_regs_wait timeout
[    2.056544] rk3288-lcdc lcdc0: lcdc0: dclk:74250000>>fps:60 
[    2.056606] switch:en=1,lcdc_id=0,screen type=1,cur type=1
[    2.312332] rk_fb_switch_screen: wait update_regs_wait timeout
[    2.312348] rk3288-lcdc lcdc0: lcdc0: dclk:74250000>>fps:60 
[    2.312391] regulator-dummy: disabling
[    2.312662] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    2.312735] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    2.312739] file system registered
[    2.312749] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[    2.312758] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[    2.313207] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.313222] android_usb gadget: Number of LUNs=2
[    2.313231]  lun0: LUN: removable file: (no medium)
[    2.313240]  lun1: LUN: removable file: (no medium)
[    2.313360] android_usb gadget: android_usb ready
[    2.313431] sensor_init: Probe name sensors
[    2.313969] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:20:19 UTC (1293884419)
[    2.319623] rockchip-spdif-card rockchip-spdif-card.25:  rk-hdmi-spdif-hifi <-> ff880000.rockchip-spdif mapping ok
[    2.320239] usbcore: registered new interface driver snd-usb-audio
[    2.320252] ALSA device list:
[    2.320260]   #0: RK_ES8323
[    2.320266]   #1: RK-SPDIF-CARD
[    2.320675] Freeing unused kernel memory: 360K (c0bf6000 - c0c50000)
[    2.339539] udevd[149]: starting version 175
[    2.371165] hdmi output corlor mode is 3
[    2.371192] switch:en=1,lcdc_id=1,screen type=6,cur type=6
[    2.420640] [WLAN_RFKILL]: wifi turn on power. 156
[    2.498015] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[    2.627227] mmc2:mmc host rescan start!
[    2.637053] rk_fb_switch_screen: wait update_regs_wait timeout
[    2.637068] rk3288_load_screen,clk_on = 0
[    2.637118] rk3288-lcdc lcdc1: lcdc1: dclk:74250000>>fps:60 
[    2.637130] rk3288-lcdc lcdc1: wakeup from standby!
[    2.735585] pixel clk is 74250000 tmds clk is 74250000
[    2.735637] rockchip-hdmiv2 ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
[    2.878301] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.879803] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.881301] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.883999] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.936439] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    2.938630] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    2.938653] mmc2: new high speed SDIO card at address 0001
[    2.957261] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[    2.957276] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
[    2.957285] [WLAN_RFKILL]: This mac address is not valid, ignored...
[    2.963434] [WLAN_RFKILL]: rockchip_wifi_power: 0
[    3.035604] EHCI: rk_ehci_hcd_enable, disable host controller
[    3.070009] [WLAN_RFKILL]: wifi shut off power.
[    3.070022] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[    3.070031] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[    3.394733] usb 3-1: new high-speed USB device number 2 using usb20_host
[    3.591742] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
[    3.591756] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.591768] usb 3-1: Product: USB 2.0 Hub [MTT]
[    3.592034] hub 3-1:1.0: USB hub found
[    3.592088] hub 3-1:1.0: 4 ports detected
s.dep: No such file or directory
FATAL: Could not load /lib/modules/3.10.0/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/3.10.0/modules.dep: No such file or directory
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
ext4
Begin: Running /scripts/local-premount ... FATAL: Could not load /lib/modules/3.10.0/modules.dep: No such file or directory
done.
FATAL: Could not load /lib/modules/3.10.0/modules.dep: No such file or directory
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
SELinux:  Could not open policy file <= /etc/selinux/targeted/policy/policy.30:  No such file or directory
[    4.809785] init: plymouth-upstart-bridge main process (301) terminated with status 1
[    4.809983] init: plymouth-upstart-bridge main process ended, respawning
[    4.847478] init: plymouth-upstart-bridge main process (311) terminated with status 1
[    4.847601] init: plymouth-upstart-bridge main process ended, respawning
[    4.848907] init: ureadahead main process (304) terminated with status 5
[    4.872602] init: plymouth-upstart-bridge main process (314) terminated with status 1
[    4.872701] init: plymouth-upstart-bridge main process ended, respawning
[    4.979757] init: mounted-proc main process (329) terminated with status 1
 * Starting Mount filesystems on boot                                    [ OK ]
 * Stopping Send an event to indicate plymouth is up                     [ OK ]
 * Starting Signal sysvinit that the rootfs is mounted                   [ OK ]
 * Starting Populate and link to /run filesystem                         [ OK ]
 * Stopping Populate and link to /run filesystem                         [ OK ]
 * Stopping Track if upstart is running in a container                   [ OK ]
 * Starting Initialize or finalize resolvconf                            [ OK ]
 * Starting Clean /tmp directory                                         [ OK ]
 * Stopping Clean /tmp directory                                         [ OK ]
 * Starting set console keymap                                           [ OK ]
 * Starting Signal sysvinit that virtual filesystems are mounted         [ OK ]
 * Starting Signal sysvinit that virtual filesystems are mounted         [ OK ]
 * Stopping set console keymap                                           [ OK ]
 * Starting Bridge udev events into upstart                              [ OK ]
 * Starting Signal sysvinit that remote filesystems are mounted          [ OK ]
 * Starting device node and kernel event manager                         [ OK ]
 * Starting Signal sysvinit that local filesystems are mounted           [ OK ]
 * Starting cold plug devices                                            [ OK ]
 * Starting log initial device creation                                  [ OK ]
 * Stopping Mount filesystems on boot                                    [ OK ]
 * Starting NFSv4 id <-> name mapper                                     [ OK ]
 * Starting flush early job output to logs                               [ OK ]
 * Starting D-Bus system message bus                                     [ OK ]
 * Stopping cold plug devices                                            [ OK ]
 * Stopping flush early job output to logs                               [ OK ]
 * Stopping log initial device creation                                  [ OK ]
 * Starting configure network device security                            [ OK ]
 * Starting SystemD login management service                             [ OK ]
 * Starting userspace bootsplash                                         [ OK ]
 * Stopping userspace bootsplash                                         [ OK ]
 * Starting Send an event to indicate plymouth is up                     [ OK ]
 * Stopping Send an event to indicate plymouth is up                     [ OK ]
 * Stopping rpcsec_gss daemon                                            [ OK ]
 * Starting configure network device security                            [ OK ]
 * Starting system logging daemon                                        [ OK ]
 * Starting configure network device                                     [ OK ]
 * Starting configure network device security                            [ OK ]
 * Starting configure network device security                            [ OK ]
 * Starting Mount network filesystems                                    [ OK ]
 * Starting configure network device                                     [ OK ]
 * Starting System V initialisation compatibility                        [ OK ]
 * Starting configure network device security                            [ OK ]
 * Starting configure network device                                     [ OK ]
 * Starting Upstart job to start rpcbind on boot only                    [ OK ]
 * Starting Failsafe Boot Delay                                          [ OK ]
 * Starting configure virtual network devices                            [ OK ]
 * Stopping System V initialisation compatibility                        [ OK ]
 * Stopping Mount network filesystems                                    [ OK ]
 * Stopping Upstart job to start rpcbind on boot only                    [ OK ]
 * Starting System V runlevel compatibility                              [ OK ]
 * Starting xinetd daemon                                                [ OK ]
 * Starting save kernel messages                                         [ OK ]
 * Starting OpenSSH server                                               [ OK ]
 * Starting regular background program processing daemon                 [ OK ]
 * Stopping save kernel messages                                         [ OK ]
 * Starting configure network device security                            [ OK ]
 * Starting RPC portmapper replacement                                   [ OK ]
 * Starting configure network device                                     [ OK ]
 * Starting NSM status monitor                                           [ OK ]
 * Starting Bridge socket events into upstart                            [ OK ]
 * Starting Bridge file events into upstart                              [ OK ]
 * 
======Expanding the rootfs...
resize2fs 1.42.9 (4-Feb-2014)
Filesystem at /dev/block/mtd/by-name/linuxroot is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 1
The filesystem on /dev/block/mtd/by-name/linuxroot is now 3792384 blocks long.

[    7.840166] turn on mali power
 * Starting turn on/off wifi                                             [ OK ]
 * Starting network connection manager                                   [ OK ]
 * Starting MySQL Server                                                 [ OK ]
Waiting for network configuration...
Waiting up to 60 more seconds for network configuration...
Booting system without full network configuration...
 * Stopping Failsafe Boot Delay                                          [ OK ]
 * Starting System V initialisation compatibility                        [ OK ]
 * Stopping System V initialisation compatibility                        [ OK ]
 * Starting save kernel messages                                         [ OK ]
 * Stopping save kernel messages                                         [ OK ]